How To Clean Rugs, Including Area Rugs, Oriental Rugs, And More?

Should your area rug be thoroughly cleaned? Learn how to clean a entrance rugs so you can revitalize all of your floor coverings whenever you want. Although area rugs can unify a space, they are also susceptible to damage from foot traffic, pets, and spills. After a while, vacuuming alone isn’t enough to get it truly clean; at this point, knowing how to do it yourself is extremely useful.

The cleaning of area rugs is a simple task that can be completed on your own. Unless your rug is extremely delicate, there is no need to hire professional rug cleaners (for example, an antique rug, Persian rug, or oriental rug).

There is no need to clean rugs on a regular basis. You should only clean the rugs when they are visibly soiled or have an offensive odor. Learn how to revitalize worn-out area rugs so they look as good as they did when they were first unrolled.

Gather Your Equipment And Supplies

Here is everything you’ll need to clean an area rug effectively:

Advertisement

• Carpet shampoo (or mild dish soap)
• Bucket
• Brush with soft bristles or sponge
• Water

Optional:

• Rubber gloves
• Garden hose
• Wet-dry vacuum

Remove Dirt And Debris

Completely vacuum both sides of the rug. You must ensure that every last piece of trash has been removed. If you have pets, use the brush attachment to remove any stray hairs.

Mix Your Cleaner

Regarding the actual cleaning solution, you can use a rug shampoo like this one. Follow the shampoo’s specific mixing instructions when mixing.

Alternatively, you can use a mixture of mild dish detergent and warm water in a bucket. The use of hot water can cause the rug to shrink or fade.

Perform A Color Test

Prior to scrubbing, ensure that the cleaner will not cause the colors to run. Test the colorfastness of the solution on a corner of the rug. If the color does not bleed, it is safe to proceed to the following step.

Clean The Rug

Lather the rug with the cleaning solution using a sponge or soft-bristled brush. Allow the cleaner to sit on the rug for five minutes before beginning the rinsing process. Anything less than that will compromise the cleaning procedure. Allow it to take effect for five minutes before beginning to remove dirt.

Clean The Rug

Rinse the rug with a garden hose or buckets of clean water to remove the soap. Ensure that the area rug is completely free of cleaning solution and that the runoff water is crystal clear.

Get Rid Of Excess Water

At this point, you should remove as much excess water from the rug as possible so that it can dry more quickly. You can use a wet-dry vacuum or a squeegee in the direction of the nap if you have one.

Allow The Rug To Dry

The next-to-last step in cleaning an area rug is drying it. Flatten the rug and allow the surface to dry completely. Then, flip it over to dry the underside. Fans can aid in accelerating the process. Ensure that the rug is completely dry before returning it to the room.

Vacuum Or Sweep The Rug

Threads and fibers can become compacted and crushed during the cleaning process. Now that you’re done, you can appreciate your freshly cleaned carpet. You are capable of cleaning area rugs on your own and can do so whenever you choose.